DeeZee Truck Bed Auxiliary Tank Installation - 2011 Ford F-250 and F-350 Super Duty- Video

Today on our 2011 Ford F-350, we're gonna be showing you how to install the Dee Zee truck bed auxiliary tank. This rectangle shaped tank is made out of aluminum. It's part number is DZ91752X. And to make your installation go a lot easier, we're also gonna be using the Dee Zee connector kit. This is part number DZ97960. Here's what our tank's gonna look like installed. more

Watch Video

12/14/2022 12:48:38 PM

DeeZee Toolbox Review - 2007 Ford F-250 and F-350 Super Duty- Video

Today on our 2007 Ford F250 Super Duty we're going to be doing a test fit of the Dee Zee Red Label aluminum truck bed toolbox. It's going to offer eight cubic feet of cargo space and it's going to come in that nice diamond plate. It's also going to be available in a black finish as well. This part number is going to be DZ8170L. Again, that's DZ8170L. It's going to have that nice low profile crossover design to go all the way across the pickup truck bed. more

Watch Video

6/16/2015 5:41:48 PM

Du-Ha Humpstor Truck Bed Storage Box Installation - 2014 Ford F-350- Video

Today on this 2014 Ford F350 Super Duty Crew Cab, we're going to install part number, DU 70200, the Duha 00:00:08 Humster 00:00:09 Truck bed Storage Box and Gun Case. First thing we need to do is go ahead and do some assembly for our case. First off, we'll go ahead and put our handle on. It uses stainless steel hardware that go through the handle and through the holes of the lid. We open up the lid and on the backside here, we'll install a flat washer and lock nut. We get a 3/8 wrench and we use the provided tool on the other side to tighten it down. Next we'll go ahead and assemble our brackets that will connect to the bed of the truck and hold up the box. We're going to take one side, lay it down, and then this pad will go towards the inside edge of the box with a flange nut. more

Watch Video

7/25/2014 9:03:11 AM

UWS Toolbox Review - 2008 Ford F-350- Video

Today on this 2008 Ford F350 were going to do a test fit of part number UWS07045. This is the UWS low profile truck bed toolbox. Few things to know about this toolbox it is a crossover style and it sits on top of the truck bed side rails. This also has a low profile design it gives a little more visibility out of the rear windshield. It also comes with a sliding tray to store small items. Plus it comes with J bolt installation hardware. more

Watch Video

12/21/2012 1:06:11 PM

UWS ProGrade Crossover Toolbox Review - 2000 Ford F-350- Video

Today were going to install part number UWS 07300. This is their Truck Bed Tool Box Extra Wide Crossover Style part of their Pro Series. To start off our install well go ahead and take the foam strips and attach them to the bottom side of the box. Well go ahead and clean out the bottom of the box with some rubbing alcohol and then attach the film strips. Well stay about 3/4-inch in from the edge of the box and well start from one end and work our way down. Now the strip is long enough so well go ahead and trim off our next strip to fill up the gap. more

Watch Video

11/19/2012 1:38:44 PM

UWS Toolbox Review - 2006 Ford F-250- Video

Today on our 2006 Ford F-250, we're going to be test fitting the UWS Truck Bed Tool Box, part number UWS01042. We'll lift the tool box place it into our bed, pick it up in over our wheel wells and set it in place against the head of the bed. This is a chest style tool box that's designed to sit ahead of our wheel wells. It's low profile so that it also provides room for those of you towing fifth wheel trailers. With this box, you have two options for mounting. You can either mount the back of the box to the head of our truck bed or you can go through the bottom of the box and through the floor over the bed. more

Watch Video

8/16/2012 1:04:12 PM

  1